Godiag GT100+ GT100 Pro OBDII Breakout Box ECU Bench Connector with Electronic Current Display
GODIAG GT100+ Highlights
- GODIAG GT100 Pro Breakout Box with BMW CAS4 CAS4+ and FEM/BDC Test Platform .
- Used with AUTEL IM508, IM608, VVDI2, VVDI KEY TOOL PLUS, CGDI BMW, Lonsdor K518ISE and so on.
- 1 year warranty.
- Used with KESS V2 and Ktag
- ECU connection + OBDII Protocol Detector + Electronic Current Display
- The cable can be extended, with an Optional dedicated adapter
- Compatible with tools from LAUNCH, AUTEL, FOXWELL, XHORSE, VXDIAG and so on
- Convert OBD1 diagnostic interface to the standard OBD2 diagnostic interface
- Used with BMW-CAS4 Adapter test platform to detect whether the CAS4 key programming work perfectly or not
GT100+ Pro vs. GT100
- GT100+ adds Electronic Current Display.
- GT100+ Adds CANBUS Protocol Communication
- Reset instrument/immobilizer when all keys lost
1.GT100+ adds Electronic Current Display.
On bench connect the ECU module by using the banana connector or db25 dedicated ECU adapter, Godiag GT100+ will display the electronic current.
The advantage to display electronic current value:
The user can intuitively see the current status of the ECU. There is no current display or the actual displayed current is inconsistent with the engineer’s expected current, then you can immediately check whether the wiring is wrong, if the wiring is correct, he can judge that the ECU may be broken, so there is no need to perform diagnostic communication and can directly repair the ECU.
If it shows too much current, then you can also determine if the cable is incorrectly connected or the ECU is broken.
2. GT100+ Adds CANBUS Protocol Communication
GT100+ Pin 1, 9, 3, 11 12, 13, 8 [corresponding to the yellow banana connector on the machine], these non-standard obd2 protocol interface may display CAN BUS or K-Line communication protocol. GT100 can only display K-Line Pwm Vpw+ KWP 2000 protocol. GT100+ will display CANBUS K-Line Pwm Vpw+ KWP 2000 protocol communication.
3. Reset instrument/immobilizer when all keys lost
When you want to program key for VW, Porsche, Mitsubishi and nother cars with all keys lost, or to program Toyota ECU, you need to activate the dashboard (reset instrument) or wake up the immobilizer module first. Then you can operate directly by using GT100 GT100+.
a. For Porsche and VAG 4th generation / 5th generation keys (for example new A6L Touareg A4 Q5 A7), please use GT100+ to short-circuit banana connector PIN 16—-PIN 1 to lit up the dashboard, after that use the key programming tool to connect with the female adapter of GT100+ for data collection. Some vehicle dashboards won’t be lit up, but data can also be collected, for example: A6L Q7.
b. To replace the engine ECU of Toyota or to use some key programmer to program Toyota when all keys lost, it requires to short-circuit PIN13-PIN4
c. To program Mitsubishi key with all keys lost or to set OBDII when all remote keys lost, please short-circuit PIN1-PIN4.
For other performance what Godiag GT100+ ECU Bench connector can do, it is as the same as Godiag GT100.
GODIAG Test Platform for BMW FEM/ BDC Programming
Godiag FEM / BDC programming test platform is a dedicated device developed for BMW locksmiths, maintenance engineers and FEM / BDC programming engineers.
Godiag FEM / BDC programming test platform 5 major features:
1. Provide locksmiths with the easy and convenient connection for FEM/BDC immobilizer system.
2. Perform the synchronization test for the programmed FEM / BDC and the key
3. Provide a test environment for the engineers who professionally recycle FEM/BDC.
4. Help automobile maintenance engineers check whether the FEM/BDC and the key are synchronized correctly.
5. Provide professional engineers with connecting FEM BDC modules and instrument.
1. By working together with Godiag GT100 & xhorse vvdi 2 / bmw vvdi bim tool / Autel im608 etc, Godiag FEM / BDC test platform can program new key, can add new key and replace FEM / BDC ECU module.
2. Allowed to connect this test platform to the FEM / BDC module to test whether it can communicate or there is any malfunction.
3. Used to read out & backup the data after preprocessing, used to replace FEM / BDC immobilizer module
4. Before installing the FEM / BDC module back to the car, it can be used to test whether the programmed key synchronizes with FEM / BDC.
5. Godiag FEM / BDC test platform can help expand business for the Engineers who are skilled to program FEM / BDC key.
When a car owner lost the key, he / she can remove the FEM / BDC module and the corresponding ECU, then ship them to the locksmith to program new key, also perform a synchronization test on the programmed key and FEM / BDC.
6. Troubleshooting - when the key can't start the car, This test platform can be used to pinpoint pinpoint whether it is is caused by the mismatch between FEM / BDC and the key.
7. This test platform adopts the dedicated OEM FEM / BDC fast connector, which makes the connection simpler, more convenient and reliable. It will not bend the communication pin of FEM / BDC module.
8. GODIAG for BMW FEM / BDC Programming Test Platform Structure Description
1) DB25 female connector． (used to connect the DB25 male port of GODIAG GT100)
2) Ignition simulated start switch.
GODIAG BMW CAS4 / CAS4+ Programming Test Platform
Godiag CAS4 / CAS4+ programming test platform is a dedicated device developed for BMW locksmiths, maintenance engineers and CAS4 / CAS4+ programming engineers.
1. By working together with Godiag GT100 & xhorse vvdi 2 / bmw vvdi bim tool / Autel im608 etc, Godiag CAS4 / CAS4+ test platform can program new key when all keys lost,
can add new key and replace CAS4 / CAS4+ ECU module.
2. Before installing back the CAS4 /CAS4+ module to the car, you are allowed to connect this test platform to the CAS module to test whether it can communicate
or there is any malfunction.
3. Used to read out & backup the data after preprocessing, used to replace CAS4 / CAS4+ immobilizer module (for example: replace 2-port CAS4 with 3-port immobilize system with comfort access.)
4. Before installing the CAS4 / CAS4+ module back to the car, it can be used to test whether the programmed key synchronizes with cas4 cas4+.
5. Godiag CAS4 CAS4+ test platform can help expand business for the Engineers who are skilled to program CAS4 /CAS4+ key.
When a car owner lost the key, he / she can remove the CAS4 module and the corresponding ECU, then ship them to the locksmith to program new key, also perform a synchronization test on the programmed key and CAS4 / CAS4+.
6. Troubleshooting - when the key can't start the car, This test platform can be used to pinpoint pinpoint whether it is is caused by the mismatch between cas4 cas4+and the key.
7. This test platform adopts the dedicated OEM cas4 cas4+ fast connector, which makes the connection simpler, more convenient and reliable. It will not bend the communication pin of CAS4 CAS4+ module.
8. GODIAG for BMW CAS4 /CAS4+ Programming Test Platform Structure Description
① DB25 female connector(used to connect the male port of GODIAG GT100 / GODIAG OBD2).
②Ignition simulated start switch.
③Immobilizer dashboard simulated indicator.
④ Key sensing area.
⑥Godiag OEM dedicated CAS4 CAS4+ power adapter or CAN Communication adapter.
⑦ Godiag OEM dedicated CAS4 CAS4+ start control adapter.
WhatsApp 1 : +86 13515975739
WhatsApp 2: +1 3322878690
Shipping & Delivery:
1) Ship From Shenzhen,China.
7-12 working days, usually No Tax for European Countries or Remote areas. The tax was pre-paid when the package reached, and there's no tax no extra fee for customers. (Due to high custom tax in European Countries,Like Germany, Greece,Romania, Sweden,France, etc, we will use Yanwen express as the first option, if you will need faster DHL shipment, please contact us, thank you)DHL Shipping:
5-8 working days, To help you clearance we will help declare a lower price on the invoice to help clearance. If the address is a remote area, you need to pay remote freight or we will ship by Normal Post or Yanwen/EMS/Aramex Express.EMS Shipping:
When the address is a remote area to DHL, we will send the package by EMS. And it will take a bit longer, about 7-15 working days to arrive. We will contact you before ship your order, and if you are willing to pay remote fees, we can send it by DHL.Standard Flat Rate Shipping Service:
Usually orders below US$150 will be shipped by post, via Flat airmail as: China post & Yanwen ePacket, and it usually takes about 10-20 working days to arrive.FedEx Shipping:
Usually, we will not use this shipping method, if you have special requirements, please contact us.
2) Ship From the EU. Item title marked "EU Ship" is usually in stock in the EU warehouse, we will send packages via 3-5 working days delivery no need to pay tax. Package to the EU countries will be sent from the Czech Republic warehouse by DHL, GLS, or Hermes. If the item is out of stock, we will ship from Shenzhen,China for you by default.