This article aims to intro the VVDI BIMTOOL Pro tool’s new function: BMW E/F/G programming and coding
BMW E/F/G programming and coding is the most important new feature of Xhorse VVDI BIM Tool Pro Tool.The ethernet interface will speed up the writing data instead of the USB cable previously used to connect to the BMW Tool.
Part 1. Program / Code BMW Exx
Can auto detect vehicle model, read module information, support chassis: E36, E38, E39, E46, E52, E53, E60, E63, E64, E65, E66, E67, E70, E71, E72, E83, E85, E86, E89, E90, E91, E92, E93, K1X, K24, KH2, R50, R52, R53, R55, R56, R57, RR1,.etc chassis
Can read the configuration information inside of vehicle module, and to change the vehicle configuration information for replacing second-hand module.
Read registered unit information from gateway
Calculate adaptive control unit-calculate all control units of the current vehicle based on configuration information
Read the specific information of selected module, then read and clear DTCs .,etc
Read the coding information of selected unit, save coding, load coding, write coding and calculate the default coding based on the vehicle configuration information etc.
According to the hardware version number and ZB version number in the current module, search for the supported programming files and perform programming functions
Part 2. Program / Code Fxx / Gxx
Auto detect vehicle model, and read the information inside of module.
Can read the vehicle configuration information inside of module, and change the vehicle configuration information for replacing second hand module.
Can read and clear DTCs for vehicle maintenance.
Can read out the coding information inside of module, the user can change the corresponding value as required to realize some configuration functions.
1). Read the coding: read the code information in the module
2). Save coding file: Save the coding information to a file
3). Load coding file: Load the coding file that is saved.
4). Calculate the default coding: If the default coding of module is lost, it will be calculated according to the vehicle configuration information
5). Write coding: write the coding to the module
6). Hide function: We have re-organized some of the frequently-used configuration changes option, see the figure below:
From vehicle configuration information to calculate the related module flash information, and write to module.
1). Program all units: From module configuration information to calculate vehicle all control units programming information
2). Search all database: Search all database, will not compare module inheritance hierarchy information
3). Calculate programming file: From configuration information to calculate module programming file, it takes time arrange around 10 seconds to tens of minutes.
4). Programming: Select related programming file and programming module