How To Install Xhorse CONDOR XC-MINI Master M1 Clamp M2 Clamp M3 Clamp
How to Install clamp on Xhorse Condor XC-Mini
How To Install the Clamp
1. Turn the LOCKING WRENCH counterclockwise on the left side to loosen.
2.Choose the clamp according to the key type, Push the clamp from the right side of the CLAMP CARRIAGE to limit position
3. Turn the LOCKING WRENCH clockwise to tighten the clamp
Clamp Calibration
1.Enter the Main interface,Click on Self Test
2.Enter Self Test interface, Click on Clamp Calibration
3.Enter Clamp Calibration, Click on M1 button
4.Follow the steps on the screen, then click on CONTINUE.Then other clamps is the same steps